- parametric-filter Verstärker
- parametric-filter Audio
- parametric-filter Batteriemanagement-ICs
- parametric-filter
- parametric-filter DLP-Produkte
- parametric-filter Datenwandler
- parametric-filter
- parametric-filter Schnittstelle
- parametric-filter Isolierung
- parametric-filter
- parametric-filter
- parametric-filter Motortreiber
- parametric-filter Energiemanagement
- parametric-filter
- parametric-filter Sensoren
- parametric-filter Schalter und Multiplexer
- parametric-filter Drahtlose Konnektivität
- parametric-filter Produkte für die drahtlose Kommunikation in der Automobilindustrie
- parametric-filter Energieeffiziente 2,4-GHz-Produkte
- parametric-filter Weitere Drahtlosprodukte
- parametric-filter Produkte unter 1GHz
- parametric-filter WLAN-Produkte
Startseite
Drahtlose Konnektivität
Produkte für die drahtlose Kommunikation in der Automobilindustrie
Kostengünstiger energieeffizienter HF-Transceiver für Sub-1GHz
Datenblatt
- document-pdfAcrobat Low-Power Sub-1-GHz Fractional-N UHF Device Family for Automotive datasheet (Rev. B) (Englisch)
CC1101-Q1
Produktdetails
- Qualification in Accordance With AEC-Q100 Grade 1
- Extended Temperature Range Up To 125°C
- Radio-Frequency (RF) Performance
- High Sensitivity (–114 dBm at 1.2 kBaud, 315MHz,
1% Packet Error Rate) - Low Current Consumption (15.5 mA in Receive,
1.2 kBaud, 315 MHz)
- High Sensitivity (–114 dBm at 1.2 kBaud, 315MHz,
- Programmable Output Power up to +10 dBm for All Supported Frequencies
- Excellent Receiver Selectivity and Blocking Performance
- Programmable Data Rate From 1.2kBaud to 250kBaud
- Frequency Bands: 310MHz to 348MHz, 420MHz to 450MHz,
and 779MHz to 928MHz - Analog Features
- 2-FSK, GFSK, and MSK Supported, as Well as OOK and
Flexible ASK Shaping - Suitable for Frequency-Hopping Systems Due to a Fast Settling
Frequency Synthesizer: 90-µs Settling Time - Automatic Frequency Compensation (AFC) Can Align Frequency
Synthesizer to Received Center Frequency - Integrated Analog Temperature Sensor
- 2-FSK, GFSK, and MSK Supported, as Well as OOK and
- Digital Features
- Flexible Support for Packet-Oriented Systems: On-Chip Support for Sync Word
Detection, Address Check, Flexible Packet Length, and Automatic CRC Handling - Efficient SPI Interface: All Registers Can Be Programmed With
One Burst Transfer - Digital RSSI Output
- Programmable Channel Filter Bandwidth
- Programmable Carrier Sense (CS) Indicator
- Programmable Preamble Quality Indicator (PQI) for Improved Protection
Against False Sync Word Detection in Random Noise - Support for Automatic Clear Channel Assessment (CCA) Before
Transmitting (for Listen-Before-Talk Systems) - Support for Per-Package Link Quality Indication (LQI)
- Optional Automatic Whitening and Dewhitening of Data
- Flexible Support for Packet-Oriented Systems: On-Chip Support for Sync Word
- Low-Power Features
- Fast Startup Time: 240µs From Sleep to Receive (RX) or Transmit (TX) Mode
- Wake-On-Radio Functionality for Automatic Low-Power RX Polling
- Separate 64-Byte RX and TX Data FIFOs (Enables Burst Mode Data Transmission)
- General
- Few External Components: Completely On-Chip Frequency Synthesizer,
No External Filters or RF Switch Needed - Green Package: RoHS Compliant and No Antimony or Bromine
- Small Size QFN 5-mm×5-mm 32-Pin Package
- Suited for Systems Compliant With EN300220 (Europe)
and FCC CFRPart15 (US) - Support for Asynchronous and Synchronous Serial Receive/Transmit
Mode for Backward Compatibility With Existing Radio Communication Protocols - Designed for Automotive Applications
- Few External Components: Completely On-Chip Frequency Synthesizer,
- APPLICATIONS
- Ultra-Low-Power Wireless Applications in the 315/433/868/915-MHz
ISM/SRD Bands - Remote Keyless Entry Systems
- Passive Entry/Passive Start Systems
- Vehicle Service Links
- Garage Door Opener
- TPMS Systems
- Ultra-Low-Power Wireless Applications in the 315/433/868/915-MHz
SmartRF Is a trademark of Texas Instruments
- Qualification in Accordance With AEC-Q100 Grade 1
- Extended Temperature Range Up To 125°C
- Radio-Frequency (RF) Performance
- High Sensitivity (–114 dBm at 1.2 kBaud, 315MHz,
1% Packet Error Rate) - Low Current Consumption (15.5 mA in Receive,
1.2 kBaud, 315 MHz)
- High Sensitivity (–114 dBm at 1.2 kBaud, 315MHz,
- Programmable Output Power up to +10 dBm for All Supported Frequencies
- Excellent Receiver Selectivity and Blocking Performance
- Programmable Data Rate From 1.2kBaud to 250kBaud
- Frequency Bands: 310MHz to 348MHz, 420MHz to 450MHz,
and 779MHz to 928MHz - Analog Features
- 2-FSK, GFSK, and MSK Supported, as Well as OOK and
Flexible ASK Shaping - Suitable for Frequency-Hopping Systems Due to a Fast Settling
Frequency Synthesizer: 90-µs Settling Time - Automatic Frequency Compensation (AFC) Can Align Frequency
Synthesizer to Received Center Frequency - Integrated Analog Temperature Sensor
- 2-FSK, GFSK, and MSK Supported, as Well as OOK and
- Digital Features
- Flexible Support for Packet-Oriented Systems: On-Chip Support for Sync Word
Detection, Address Check, Flexible Packet Length, and Automatic CRC Handling - Efficient SPI Interface: All Registers Can Be Programmed With
One Burst Transfer - Digital RSSI Output
- Programmable Channel Filter Bandwidth
- Programmable Carrier Sense (CS) Indicator
- Programmable Preamble Quality Indicator (PQI) for Improved Protection
Against False Sync Word Detection in Random Noise - Support for Automatic Clear Channel Assessment (CCA) Before
Transmitting (for Listen-Before-Talk Systems) - Support for Per-Package Link Quality Indication (LQI)
- Optional Automatic Whitening and Dewhitening of Data
- Flexible Support for Packet-Oriented Systems: On-Chip Support for Sync Word
- Low-Power Features
- Fast Startup Time: 240µs From Sleep to Receive (RX) or Transmit (TX) Mode
- Wake-On-Radio Functionality for Automatic Low-Power RX Polling
- Separate 64-Byte RX and TX Data FIFOs (Enables Burst Mode Data Transmission)
- General
- Few External Components: Completely On-Chip Frequency Synthesizer,
No External Filters or RF Switch Needed - Green Package: RoHS Compliant and No Antimony or Bromine
- Small Size QFN 5-mm×5-mm 32-Pin Package
- Suited for Systems Compliant With EN300220 (Europe)
and FCC CFRPart15 (US) - Support for Asynchronous and Synchronous Serial Receive/Transmit
Mode for Backward Compatibility With Existing Radio Communication Protocols - Designed for Automotive Applications
- Few External Components: Completely On-Chip Frequency Synthesizer,
- APPLICATIONS
- Ultra-Low-Power Wireless Applications in the 315/433/868/915-MHz
ISM/SRD Bands - Remote Keyless Entry Systems
- Passive Entry/Passive Start Systems
- Vehicle Service Links
- Garage Door Opener
- TPMS Systems
- Ultra-Low-Power Wireless Applications in the 315/433/868/915-MHz
SmartRF Is a trademark of Texas Instruments
The CC11x1-Q1 device family is designed for very low-power wireless applications. The circuits are mainly intended for the Industrial, Scientific and Medical (ISM) and Short Range Device (SRD) frequency bands at 315 MHz, 433 MHz, 868 MHz, and 915 MHz, but can easily be programmed for operation at other frequencies in the 310-MHz to 348-MHz, 420-MHz to 450-MHz, and 779-MHz to 928-MHz bands.
The devices integrate a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 250 kBaud. CC11x1-Q1 family provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating parameters and the 64-byte transmit/receive FIFOs can be controlled via an SPI interface. In a typical system, the devices are used together with a microcontroller and a few additional passive components.
The CC11x1-Q1 device family is designed for very low-power wireless applications. The circuits are mainly intended for the Industrial, Scientific and Medical (ISM) and Short Range Device (SRD) frequency bands at 315 MHz, 433 MHz, 868 MHz, and 915 MHz, but can easily be programmed for operation at other frequencies in the 310-MHz to 348-MHz, 420-MHz to 450-MHz, and 779-MHz to 928-MHz bands.
The devices integrate a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 250 kBaud. CC11x1-Q1 family provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating parameters and the 64-byte transmit/receive FIFOs can be controlled via an SPI interface. In a typical system, the devices are used together with a microcontroller and a few additional passive components.
filter Andere Produkte für die drahtlose Kommunikation in der Automobilindustrie suchen
Ähnliche Produkte, die für Sie interessant sein könnten
Alternativen vergleichen
Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
Technische Dokumentation
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 20Typ | Titel | Datum | ||
---|---|---|---|---|
* | Data sheet | Low-Power Sub-1-GHz Fractional-N UHF Device Family for Automotive datasheet (Rev. B) | 16 Apr 2010 | |
White paper | Understanding Functional Safety FIT Base Failure Rate Estimates per IEC 62380 and SN 29500 (Rev. A) | PDF | HTML | 30 Apr 2024 | |
Application note | CC11xx Sensitivity Versus Frequency Offset and Crystal Accuracy (Rev. D) | PDF | HTML | 27 Sep 2018 | |
Application note | CRC Implementation (Rev. E) | PDF | HTML | 27 Sep 2018 | |
Product overview | Car access product family (Rev. A) | 10 Sep 2013 | ||
Application note | DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E) | 22 Feb 2013 | ||
Application note | Resonant Trimming Sequence | 09 Jan 2013 | ||
Application note | DN022 -- CC110x CC111x OOK ASK Register Settings (Rev. E) | 08 Mär 2012 | ||
Product overview | Car access product family | 21 Feb 2012 | ||
Application note | DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C) | 30 Aug 2011 | ||
Application note | DN505 -- RSSI interpretation and timing (Rev. D) | 16 Jun 2010 | ||
Application note | DN010 -- Close-in Reception with CC1101 (Rev. B) | 21 Jul 2009 | ||
Application note | DN500 -- Packet Transmission Basics (Rev. C) | 06 Apr 2009 | ||
Application note | DN111 - Current Consumption for a Polling Receiver (Rev. A) | 24 Mär 2009 | ||
Application note | DN501 -- PATABLE Access (Rev. B) | 24 Mär 2009 | ||
Application note | DN017 -- CC11xx 868/915 MHz RF Matching (Rev. A) | 31 Mär 2008 | ||
Application note | DN013 -- Programming output powers on CC1101 (Rev. A) | 02 Jan 2008 | ||
Application note | DN503 -- SPI Access (Rev. B) | 22 Okt 2007 | ||
Application note | DN504 -- FEC Implementation (Rev. A) | 22 Okt 2007 | ||
Application note | DN506 -- GDO Pin Usage (Rev. A) | 22 Okt 2007 |
Design und Entwicklung
Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.
Designtool
SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — Hardware-Designüberprüfungen für SimpleLink™ CC1xxx-Bausteine
To get started with theSimpleLink™ Sub-1GHz hardware design review process:
- Step 1: Before requesting a review, it is important that to review the technical documentation and design & development resources available on the corresponding product page (see CC1xxx product page links below).
- Step 2: (...)
Gehäuse | Pins | CAD-Symbole, Footprints und 3D-Modelle |
---|---|---|
VQFN (RHB) | 32 | Ultra Librarian |
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.
Bestellen & Qualität
F\u00FCgen Sie Ihrem Warenkorb ein Produkt hinzu und beginnen Sie den Auscheckvorgang, um die im Bestand verf\u00FCgbaren Auswahlm\u00F6glichkeiten f\u00FCr Chargen- oder Datumscodes anzuzeigen.
Mehr erfahren
Beinhaltete Information:
- RoHS
- REACH
- Bausteinkennzeichnung
- Blei-Finish/Ball-Material
- MSL-Rating / Spitzenrückfluss
- MTBF-/FIT-Schätzungen
- Materialinhalt
- Qualifikationszusammenfassung
- Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
- Werksstandort
- Montagestandort
Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.
Support und Schulungen
TI E2E™-Foren mit technischem Support von TI-Ingenieuren
Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.
Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support.
Videoreihe
Alle Videos anzeigen